The 1300GS/GSA is a fantastic bike but it does have one flaw: No standard center-mount brake light! While it might look sleek to have the brake light part of the turn signal pods, it is far from safe. The brake lights are small, when a turn signal is flashing there is only one brake light visible and the turn signals are red (turn signals should be amber to differentiate from the brake light).
The AdMore Light Bar will give your 1300GS/GSA the added safety lighting that is currently missing from your bike. Easy installation with no CanBus errors or fault codes!
Mounting Options
If your 1300GS/GSA has blind spot monitoring and the two bolts (in blue circles) as shown in the image, you can mount the AdMore Light Bar just below the top rack and just above the radar box (exactly where you would expect a brake light to be!).
You also have the option of using the included offset bracket to mount the Light Bar just below or just above your license plate.
If mounting below your plate, we recommend purchasing the AdMore Splash Guard to protect your Light Bar investment.
Wiring Options
1. Direct Wire
To wire the Light Bar directly to your bike, you will need to purchase the AdMore Light Bar Pro (the Standard Light Bar is not compatible). The included premium wire tap connectors won’t damage your wires. We have the wire colors for your 1300GS/GSA.
Once you have the Light Bar Pro installed, you will need to connect to your Light Bar with your smart phone using the free AdMore App to activate “2-Lamp mode “as shown. (This setting is “Off” by default. You will need to toggle it “On”.)
2. Plug ‘n’ Play Adapter
Connect your AdMore Light Bar or Light Kit to your BMW motorcycle using the OEM connectors on your bike. Simply disconnect the OEM connectors under the seat and connect our plug-n-play adapters (2).
3. Connect to a Motorcycle Accessory Manager (e.g. HEX ezCAN, Denali CANsmart controller, or a MotoCAN)
When using an accessory manager, either the Standard or the Pro version of the Light Bar will work for you. In fact, it’s a Plug-n-Play installation! The AdMore ezLINK connects directly to any HEX ezCAN, Denali CanSmart, or MotoCAN and allows you to connect up to three AdMore Light Kits without having to tap the wires on your bike! It couldn’t be any easier!
To make it even better, if you buy a Light Bar (or Light Kit), an ezCAN, and the ezLINK together, you get 50% off the ezLINK!
Check out the ezLINK here: AdMore ezLINK
Check out the ezCAN here: HEX ezCAN
Select your Light Bar now to make you more visible and safer on the road!
