AdMore ezLINK

The AdMore ezLINK connects directly to any HEX ezCAN or Denali CanSmart and allows you to connect any AdMore Light Bar or Light Kit without having to tap the wires on your bike! It couldn’t be any easier!

Installing the AdMore ezLINK is easy – simply follow these steps:

  1. Register your HEX ezCAN at www.hexezcan.com
  2. Download the ezCAN/CanSmart software
  3. Install your ezCan or CanSmart controller on your bike
  4. Mount the AdMore Light Bar/Kit and route the cable to an area under the seat
  5. Connect the ezLINK pigtail to the AdMore Light Bar using the included terminal block, wire color to wire color.
  6. Connect one end of the AdMore ezLINK to the pigtail and the other end to the White output (shortest output) of the ezCAN/CanSmart
  7. Turn the bike on to ensure the AdMore Light Bar/Kit illuminates in tail light mode (50% intensity)
  8. Connect to your ezCAN/CanSmart using the supplied usb cable
  9. Set the White output to “ezBUS” and click “Apply”
  10. In the upper right-hand corner, click on the 3 lines and select “ezBUS devices” and scan for ezBUS devices
  11. Select “AdMore ezLINK” and click “Close”
  12. Finally, test the brake and turn signal functions

Please note: Your AdMore Light Kit cannot be configured using the ezCAN/CanSmart software!  If you are installing an AdMore Light Bar Pro, you can configure the Light Bar using the free AdMore CONNECT app (iOS & Android)