Brand: AdMore Lighting
Availability: In Stock
UNIVERSAL SIDE CASE, BI-COLOR KIT
$149.00 – $159.00
Description
The AdMore Light Kit for universal side cases. Jesse? Pelican? TRAX? Trekker? Regardless of your case, chances are our new high-powered light kit will fit your case and will look great!
Enhance your visibility! Make sure that you’re seen with this light kit installed in your side cases!
The AdMore side case light kit significantly increases your visibility on the road by providing brake light, tail light and amber turn signal functionality to your side cases. The new power harness that comes with this light kit even allows you to customize specific functionality.
Our low-profile, universal bi-color (Red/Amber) light arrays can be mounted on just about any side case with a relatively flat surface. Each LED light array comes with high strength 3M tape for a quick and permanent installation.
Features
- High-powered red/amber LED arrays look beautiful on aluminum and poly-carbonate side cases.
- New power harness design allows you to customize specific functions: 1. Brake Light Modulation (Default=”On”), 2. Brightness (Default=”High”), 3. Tail light (Default=”On”).
- Power Harness mates to case using weatherproof, micro connectors to allow for easy and quick removal of your cases from your bike
- Brake light with modulation (can be turned off) provides an excellent safety feature by quickly flashing the light kit brake lights 3 times before going solid at high intensity (similar functionality to many emergency vehicles on the road)
- Case lights remain on while riding (tail light mode optional)
- Amber turn signal functionality
- Easy installation – only basic tools required
- CANbus/HexEZCan compatible
What’s Included
- Power Harness
- Mating Case Harness (2)
- Two (2) high-intensity bi-color (red / amber) LED arrays
- Premium wire tap connectors
- Detailed instructions
- One (1) year limited warranty
Installation is easy and can be done in an hour or two using basic tools!
You will not ride unnoticed with this light kit installed in your side cases! This kit is an important safety feature as it defines the edges of your bike!
Compatibility
- No compatibility issues that we are aware of
Available Options
- This kit is available with arrays in two sizes:
- Small: 5″ x 1/2″ x 3/8″ (130mm x 13mm x 10mm)
- Large: 83/4″ x 1/2″ x 3/8″ (220mm x 13mm x 10mm)
- To make installation even easier, if your bike is listed in the option menu above, you can select the indicated adapter which comes with an OEM connector specific for your bike!
Check out this install on a 2019 BMW R1200GSA:
Important
All of our light kits come with premium wire tap connectors to easily, quickly and effectively tap the necessary wires on your bike. If your bike is listed in the option menu above, you can select the indicated harness or adapter which comes with an OEM connector specific for your bike to make installation even easier and faster!
Please note: The adapter options are for the indicated motorcycles only! If you do not have any of these motorcycles please do not order these optional adapters. For all other motorcycles, please choose the “Standard” harness from the option list.
8 reviews for UNIVERSAL SIDE CASE, BI-COLOR KIT
| 5 star | 75% | |
| 4 star | 25% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% | |
| Powered by Customer Reviews Plugin | ||
You must be logged in to post a review.
Joe Lorenzo (verified owner) –
The installation went relatively quick, once I determined the location of the holes to be drilled in the side cases! Tapping into the existing wiring using the Posi-Taps was easy. I’ll give 5 stars for the quality of the kit itself and the functions of the LED array for the rear, brake, & turn signal lights. Excellent brightness and definitely adds a huge amount increased visibility from the rear. 2 things, I think, could use some improvement, and why I gave 4 stars:
1) The cable plug that goes from the controller to the chassis receptacle (on side case) should either be a right angle or the kit should include a right angle adapter and
2) There should be an intermediate connector between the controller and the cable plug, because:
A right angle cable plug (or adapter) to mate with the right angle chassis receptacle would allow the cable to dress closely along the side of the case and be less apt to be accidentally snagged by something and possibly breaking. The area on the inside facing area of the outside portion of the case is relatively out-of-the-way, but, accidents do happen! And, if that cable plug does get damaged, the array on that side could no longer be functional. So, questions is, seeing as that cable goes directly to the controller: How to repair that without buying an entire new controller with cable and wiring leads (or try to do makeshift repairs myself)? If there was an additional junction between the existing cable plug and the controller and (that cable section) could be purchased as a repair part, this would definitely be an easier fix.
Uploaded image(s):
Uploaded video(s):
Sean K. (verified owner) –
Product works great. Customer service was mediocre with no response to repeated pre-purchase request for info.